83
VQT2S62
Advanced (Recording pictures)
It will take pictures changing the type of film in accordance with the setting every time the
shutter button is pressed. (Up to 3 pictures)
Press 2/1 to select [MULTIFILM].
Select either [MULTIFILM 1], [MULTIFILM 2], or
[MULTIFILM 3] with 3/4, and then select the film
to be set for each with 2/1.
•You can also use the rear dial to set.
•[OFF] can be selected only for [MULTIFILM 3].
Press [MENU/SET] to set.
Press [MENU/SET] to close the menu.
•You can also press the shutter button halfw ay to close the menu.
Focus on the subject and take a picture.
•It will continuously take pictures by keeping the shutter button pressed when it is set to
Burst Mode. (Up to 3 pictures)
•When using a self-timer, up to 3 pictures with set film will be take n if the shutter bu tton is
pressed. (It will operate same as [ ] even if it is set to [ ].)
•Multi film indication ([ ]) displayed on the screen will flas h until all pictures of preset
amount are taken.
Note
•[STANDARD] is registered in [MULTIFILM 1], [MULTI FILM 2] and [OFF] is registered in
[MULTI FILM 3] at the time of purchase.
•White Balance Bracket will be disabled when the Multi Film Bracket is set.
•Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.
Multi Film Bracket
DMC-G10KPP-VQT2S62_eng.book 83 ページ ２０１０年４月２３日　金曜日　午後８時０分