VQT2S62
132
Advanced (Playback)
Operations performed during slide show
The cursor displayed during playback is the same as 3/4/2/1.
The menu screen is restored when [] is pressed.
Changing the slide show settings
You can change the settings for slide show playback by selecting
[EFFECT] or [SETUP] on the slide show menu screen.
[EFFECT]
This allows you to select the screen effects when switching from
one picture to the next.
[NATURAL], [SWING], [URBAN], [OFF]
When [URBAN] has been selected, the picture may appear in black and white as a screen
effect.
[EFFECT] is set to [OFF] when pla ying a slide show with motion pict ures only.
Some [EFFECT] will not operate when playing back pictures displayed vertically.
[SETUP]
[DURATION] or [REPEAT] can be set.
[DURATION] can be set only when [OFF] has been selected as the [EFFECT] setting.
Note
It is not possible to add new music.
Press 3 to select [START] and then press
[MENU/SET].
Press 4 to finish the slide show.
Normal Playback resumes after the slide show finishes.
APlay/Pause
BStop
CBack to previous picture¢
DAhead to next picture¢
¢These operations can be performed only in the Pause Mode or
during motion picture playback.
EReduce volume level
FIncrease volume level
Item Settings
[DURATION] 1SEC./2SEC./3SEC./5SEC.
[REPEAT] OFF/ON
[SOUND]
[OFF]: There will be no sound.
[AUTO]: Music is played when the still pictures are played
back, and audio is played when the motion pictures
or still pictures with audio are played back.
[MUSIC]: Music is played back.
[AUDIO]: Audio (only for motion pictures and still pictures with
audio) is played back.
DMC-G10KPP-VQT2S62_eng.book 132 ページ 2010年4月23日 金曜日 午後8時0分