Panasonic DMC-G10K operating instructions Selecting a single picture and printing it

Connecting to other equipment

Note

•Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction.

•Turn the camera off before connecting or disconnecting the AC adaptor (P161).

•Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.

Selecting a single picture and printing it

Press 2/1 to select the picture and then press [MENU/SET].

•The message disappears in about 2 seconds.

Press 3 to select [PRINT START] and then press [MENU/SET].

•Refer to P156 for the items which can be set before starting to print the pictures.

•Press [MENU/SET] to cancel printing halfway.

•Disconnect the USB connection cable after printing.

PictBridge 100_0001

PLEASE SELECT

THE PICTURE TO PRINT

SELECT	PRINT MENU
MULTI PRINT

SINGLE SELECT
PRINT START
PRINT WITH DATE		OFF
NUM. OF PRINTS		1
PAPER SIZE
PAGE LAYOUT
CANCEL	SELECT	SET MENU

Selecting multiple pictures and printing them

Press 3.

Press 3/4 to select an item and then press [MENU/SET].

•If the print check screen has appeared, select [YES], and print the pictures.

PictBridge
MULTI SELECT
SELECT ALL
PRINT SET (DPOF)
FAVORITE
CANCEL	SELECT	SET MENU

Item	Description of settings
	Multiple pictures are printed at one time.
[MULTI SELECT]	• Press 3/4/2/1 to select the pictures, and then When [DISPLAY] is
	pressed, [é] appears on the pictures to be printed. (When [DISPLAY] is
	pressed again, the setting is canceled.)
	• After the pictures have been selected, press [MENU/SET].
[SELECT ALL]	Prints all the stored pictures.
[PRINT SET	Prints the pictures set in [PRINT SET] only. (P143)
(DPOF)]
[FAVORITE]¢	Prints the pictures set as favorites only. (P134)

¢Only when [FAVORITE] is at [ON] and when there are pictures set as favorites. (P134)

VQT2S62 155