Panasonic DMC-G10K ROTATE/M Rotate Disp, Select Rotate on the Playback Mode menu. P28

Advanced (Playback)

N[ROTATE]/M [ROTATE DISP.]

This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90o steps.

Rotate (The picture is rotated manually)

Select [ROTATE] on the [PLAYBACK] Mode menu. (P28)

•The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].

Press 2/1 to select the picture and then press [MENU/SET].

•Motion pictures and protected pictures cannot be rotated.

Press 3/4 to select the direction to rotate the picture and then press [MENU/SET].

: The picture rotates clockwise in steps of 90o.

: The picture rotates counter-clockwise in steps of 90o.

Press [‚] to return to the menu screen.

•Press [MENU/SET] to close the menu.

Rotate display (The picture is automatically rotated and displayed)

Select [ROTATE DISP.] on the [PLAYBACK] Mode menu. (P28)

Press 4 to select [ON] and then press [MENU/SET].

•The pictures are displayed without being rotated when you select [OFF].

•Refer to P49 for information about how to play back pictures.

Press [MENU/SET] to close the menu.

Note

•[ROTATE DISP.] can only be used with the lens (P15) compatible with the Direction Detection Function (P36).

•When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording information etc. to be added. It was established by “JEITA (Japan Electronics and Information Technology Industries Association)”.

•It may not be possible to rotate pictures that have been recorded with other equipment.

•The display is not rotated during Multi Playback (P50).

•Pictures recorded with the camera upside down will not be displayed rotated.

142 VQT2S62