17
VQT2S62
Preparation
Preparation
Attaching/Detaching the Lens
Check that the camera is turned off.
Close the flash.
Turn the lens rear cap A and the body cap B in the direction of the
arrow to detach them.
Do not put your hands inside the mount.
Align the lens fitting marks C (red
marks) on the camera body and the lens
and then rotate the lens in the direction
of the arrow until it clicks.
Do not press the lens release button D when you
attach a lens.
Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
Check that the lens is attached correctly .
Detach the lens cap.
Detach the lens cap before taking pictures.
Attaching a lens to the camera body
DMC-G10KPP-VQT2S62_eng.book 17 ページ 2010年4月23日 金曜日 午後8時0分