VQT2S62
72
Advanced (Recording pictures)
AF area can be moved when [Ø] is selected. The size of AF area can also be changed.
Select [Ø] and then press 4.
AF area setting screen is displayed. It will return to previous
screen by pressing [DISPLAY].
Press 3/4/2/1 to move the AF area.
You can set to arbitrary position of th e scr een. (It cannot be set
to edge of the screen)
The AF area returns to the center when [] is pressed.
Rotate the rear dial to change the size of the AF area.
Rear dial right: Enlarge
Rear dial left: Shrink
It can be changed to 4 different sizes of “spot” A, “normal” B,
“large” C, and “extra large” D.
Press [MENU/SET] to set.
Move the AF area easily while taking pictures
When the [DIRECTAF AREA] (P125) in the [CUSTOM] menu is set to [ON] while [Ø] is
selected, it is possible to move the AF area directly with 3/4/2/1.
It is also possible to change the size of AF area by rotating the rear dial in the screen to set
the position.
[SENSITIVITY] (P79), [Fn BUTTON S ET] (P123), [AFMODE] (P6 9), or [WHITE BALANCE]
(P76) cannot be set with 3/4/2/1. Make the setting with the Quick Menu (P30).
Note
The spot metering target can also be moved to match the AF area when using [Ù]. (P118)
Set the size of AF area to “normal”, “large”, or “extra large” when it is hard to focus us ing the
“spot”.
[DIRECT AFAREA] is fixed to [OFF] in Ad vanced Scene Mode, all Scene Modes other than
[PERIPHERAL DEFOCUS], or My Color Mode.
Setting the AF area
A
B DC
DMC-G10KPP-VQT2S62_eng.book 72 ページ 2010年4月23日 金曜日 午後8時0分