VQT2S62
100
Advanced (Recording pictures)
[REC] Mode: ( only when the mode dial is set to [ ])
Advanced (Recording pictures)
Motion Picture Mode
The functions available when recording motion pictures differ according to the lens you are
using, and the operational sound of the lens may be recorded.
Refer to page 16 for details.

Set the mode dial to [n].

If the [¦] button is pressed with the mode dial set to [n], it becomes a motion picture
reflecting the settings of Intelligent Auto Mode. (P101)

Set the Focus Mode.

About the Focus Mode settings
Focusing changes depending on the Focus Mode setting and the [CONTINUOUS AF]
setting (P123) in the [MOTION PICTURE] Mode menu.
Depending on the recording conditions or lens used, operational sound may be re corded when
the Auto Focus is operated while recording a motion picture. It is recommended to record with
[CONTINUOUS AF] (P123) set to [OFF], if the sound of operation bothers you to avoid
recording the lens noise.
Focus Mode [CONTINUOUS AF] Settings
AFS/AFC
ON
You can have the camera focus
continuously. Alternatively, you can
have the camera focus when you
press the shutter button halfway.
OFF You can have the camera focus when
the shutter button is pressed halfway.
MF ON You can focus manually.
OFF

Press the shutter button halfway to focus

and then press it fully to start recording.

A Elapsed recording time
B Available recording time
After pressing the shutter button fully , release it
straight away.
The audio is also recorded simultaneously from the
built-in microphone on this unit. (Motion pictures
cannot be recorded without audio.)
The recording state indicator (red) C will flash while recording motion pictures.
Press the shutter button halfway when it is difficult to focus on the subject.
B
CA
DMC-G10KPP-VQT2S62_eng.book 100 ページ 2010年4月23日 金曜日 午後8時0分