Panasonic DMC-G10K operating instructions Settings, Press MENU/SET twice to close the menu

Advanced (Recording pictures)

∫Changing the settings for [STEP] and [SEQUENCE] in Auto Bracket

1Select [AUTO BRACKET] in the [REC] Mode menu. (P28)

2Press 3/4 to select [STEP] or [SEQUENCE] and then press 1.

3Press 3/4 to select the setting and then press [MENU/SET].

Item	Settings
	[3•1/3] (3 pictures)
	[3•2/3] (3 pictures)
[STEP]	[5•1/3] (5 pictures)
	[5•2/3] (5 pictures)
	[7•1/3] (7 pictures)
	[7•2/3] (7 pictures)

Item	Settings
[SEQUENCE]	[0/`/_]
	[`/0/_]

4Press [MENU/SET] twice to close the menu.

• You can also press the shutter button halfway to close the menu.

Note

•When taking pictures using Auto Bracket after setting the Exposure Compensation range, the pictures taken are based on the selected Exposure Compensation range.

•The exposure may not be compensated with Auto Bracket depending on the brightness of the subject.

•The Auto Review function is activated regardless of the Auto Review setting. (Will not hold) You cannot set the Auto Review function in the [SETUP] menu.

•When the flash is activated, you can take only 1 picture.

•Set number of pictures cannot be recorded if the recordable number of pictures is less than set number of pictures.

•Settings for Multi Film Bracket have priority during the Multi Film Bracket recording (P83).

VQT2S62 67