Panasonic DMC-G10K Setting Date/Time (Clock Set)

VQT2S62
26
Preparation
Setting Date/Time (Clock Set)
•The clock is not set when the camera is shipped.
Turn the camera on.
A[MENU/SET] button
Press [MENU/SET].
Press 2/1 to select the items (year, month,
day, hour, minute, displa y seque nce or time
display format), and press 3/4 to set.
A: Time at the home area
B: Time at the travel destination (P112)
‚: Cancel without setting the clock.
•Select either [24HRS] or [AM/PM] for th e time display
format.
•AM/PM is displayed when [AM/PM] is selected.
•When [AM/PM] is selected as the time display format, midnight is displayed as
AM 12:00 and noon is displayed as PM 12:00. This display format is common in the US
and elsewhere.
Press [MENU/SET] to set.
Press [MENU/SET].
•Press [‚] to return to the settings scree n.
•Turn the camera off after finishing setting the clock. Then turn it on and check that the
clock setting is correct.
•When [MENU/SET] has been pressed to complete the settings without the clo ck ha ving
been set, set the clock correctly by following the “Ch ang ing th e cloc k set t ing” proced ure.
Select [CLOCK SET] in the [SETUP] menu, and press 1. (P28)
•It can be changed in steps 3, 4 and 5 to set the clock.
•The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Changing the clock setting
ON
OFF
:
:
DMC-G10KPP-VQT2S62_eng.book 26 ページ ２０１０年４月２３日 金曜日 午後８時０分