Panasonic DMC-G10K Adjust the flash output

61
VQT2S62
Advanced (Recording pictures)
•When you use certain lenses, light from the flash may be bl ocked or fa il to c over the lens
field of view, causing dark areas to appear in the resulting pictures.
•When taking a picture with the flash, we recommend removing the lens hood. In some
cases it may not allow the scene to be illuminated properly .
•It may take time to charge the flash if you repeat taking a picture. Take a picture after the
access indication disappears.
•The Red-Eye Reduction effect differs between people. Also, if the subject was far away from
the camera or was not looking at the first flash, the effect may not be evident.
•When you attach an external flash, it takes priority over the built-in flash. Refer to P158 for the
external flash.
Applicable modes:
Adjust the flash output when the subject is small, or the reflectivity is very high or low.
Select [FLASH ADJUST.] in the [REC] Mode menu. (P28)
Press 2/1 to set the flash output and then press
[MENU/SET].
•You can adjust from [j2EV] to [i2 EV] in steps of [1/3EV].
•Select [0 EV] to return to the original flash output.
•You can also use the rear dial to set.
Press [MENU/SET] to close the menu.
•You can also press the shutter button halfw ay to close the menu.
Note
•[i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
•The flash output setting is memorized even if the camera is turned off.
Adjust the flash output
DMC-G10KPP-VQT2S62_eng.book 61 ページ ２０１０年４月２３日 金曜日 午後８時０分