127
VQT2S62
Advanced (Recording pictures)
•Refer to P73 for details.
•Set to [ON] to display the [EXPO.MET ER] when correcting exposure,
performing program shift, setting aper ture, and setting shutter speed.
•Unsuitable areas of the range are displayed in red.
•The Exposure Meter will only be displayed when the camera is set to
display information on the LCD monitor or viewfinder (P54)
•The [EXPO.METER] disappears after approximately
4 seconds if no operation is performed.
•Refer to P55 for details.
•Refer to P54 for details.
•Refer to P55 for details.
[MF GUIDE]
In Manual Focus, it is possible to check if the focus position is
near side or far side.
[OFF]
[ON]: MF guide is displayed on the screen when the focus
ring is rotated.
[PREVIEW HOLD]
This will set the operation of the [ ] button when displaying the
preview screen.
[OFF]: Preview screen is displayed only when the [ ] is
pressed.
It will return to previous screen when [ ] is released.
[ON]: Preview screen is displayed even after the [ ] is
released after pressing. (P87)
It will return to previous screen when [ ] is pressed
again.
[EXPO.METER]
Select whether or not to display the Exposure Meter when the mode dial is
switched to ³/±/´/² etc.
[OFF]/[ON]
[LVF DISP.STYLE]
This will set the display style of the viewfinder.
[]: Viewfinder style
[]: LCD monitor style
[LCD DISP.STYLE]
This will set the display style of the LCD monitor.
[]: Viewfinder style
[]: LCD monitor style
[PLAYON LCD]
It will switch automatically to LCD monitor during the playback
when the viewfinder was selected during the recording.
[OFF]/[ON]
DMC-G10KPP-VQT2S62_eng.book 127 ページ ２０１０年４月２３日　金曜日　午後８時０分