VQT2S62
86
Advanced (Recording pictures)
∫About [B] (Bulb)
If you set the shutter speed to [B], the shutter stays open while the shutter button is
pressed fully (up to about 4 minutes).
The shutter closes if you release the shutter button.
Use this when you want to keep the shutter open for a long time to take pictures of
fireworks, a night scene etc.
•If you set the shutter speed to [B], [B] is displayed on the screen.
•When you take pictures with the shutter speed set to [B], use a suf ficiently charged battery.
(P21)
•We recommend using a tripod or the remote shutter (DMW-RSL1; optional) when you take
pictures with the shutter speed set to [B]. Refer to P160 for information about the remote
shutter.
•When you take pictures with the shutter speed set to [B], noise may become visible. To avoid
picture noise, we recommend setting [LONGSHTR NR] in the [REC] Mode menu to [ON]
before taking pictures. (P120)
•The Manual Exposure Assistance does not appear.
Note
•The brightness of the LCD monitor/Viewfinder may differ from the brightness of the actual
pictures. Check the pictures using the playback screen.
•If the exposure is not adequate, the aperture value and the shutter speed turn red and blink
when the shutter button is pressed halfway.
•[‡], [ ], [ ] and [ ] for flash cannot be set.
•The [SENSITIVITY] is automatical ly set to [ISO100] when you switch the Recording Mode to
Manual Exposure while the [SENSITIVITY] is set to [AUTO] or [ ] (Intelligent).
•If you press the shutter button fully when the shutter speed is slow, the shutter speed on the
screen counts down.
•When you use a lens with an aperture ring, the aperture ring setting takes priority.
DMC-G10KPP-VQT2S62_eng.book 86 ページ ２０１０年４月２３日 金曜日 午後８時０分