VQT2S62
20
Preparation
Attaching the Shoulder Strap
We recommend attaching the shoulder strap when using the camera to prevent it from
dropping.
Pass the shoulder strap through the
shoulder strap eyelet on the camera body.
A:Shoulder strap eyelet
Pass the end of the shoulder strap through
the ring in the direction of the arrow and
then pass it through the stopper.
Pass the end of the shoulder strap through
the hole on the other side of the stopper.
Pull the other side of the
shoulder strap and then check
that it will not come out.
Perform steps 1 to 4 and then attach
the other side of the shoulder strap.
Note
Attach the shoulder strap so that the “LUMIX” LOGO is on the outside.
Use the shoulder strap around your shoulder.
Do not wrap the strap around your neck.
It may result in injury or accident.
Do not leave the shoulder strap where an infant can reach it.
It may result in an accident by mistakenly wrapping around the neck.
DMC-G10KPP-VQT2S62_eng.book 20 ページ 2010年4月23日 金曜日 午後8時0分