6 PRINTING LISTS AND REPORTS
Setting the communication report output
The following conditions of the communication report output can be set.
MEMORY TX: | OFF, ALWAYS, ON ERROR |
DIRECT TX: | OFF, ALWAYS, ON ERROR |
MULTI TX: | OFF, ALWAYS, ON ERROR |
POLLING: | OFF, ALWAYS, ON ERROR |
RELAY ORIGINATOR: OFF, ALWAYS, ON ERROR
RELAY STATION: OFF, ALWAYS, ON ERROR
RELAY DESTINATION: OFF, ALWAYS, ON ERROR
If the [ALWAYS] button is selected: The report is output after every communication is completed.
If the [ON ERROR] button is selected: The report is output when a communication error has occurred.
If the OFF button is selected. The report is not output.
1
2
Press the [USER FUNCTIONS] button on the control panel.
Press the [ADMIN] button and then press the [PASSWORD] button.
3 Enter the administrator password (6 to 10 digits), and then press the [ENTER] button.
