2 SENDING A FAX
54 Sending Originals
Other transmissionsOn-hook transmission
In this mode, you can confirm the answering tone from the remote FAX without picking up the
handset of the external telephone.
When the other party receives the call as a telephone call, you can talk by picking up the hand-
set of the external telephone.
yThis operation is available when the Line 1 lamp is OFF.
1
Place the original(s).
y P.30 “Setting originals”
2
Press the [FAX] button on the control panel.
3
Press the [OPTION] button and set the transmission conditions.
y P.33 “Setting the Transmission Conditions”
5
Specify the remote Fax.
ySpecifying by digital keys ( P.40 “Direct entry with digital keys”)
ySpecifying by address book ( P.41 “Address book entry”)
Each press of a digital key dials a number. If you make a mistake when dialing the
remote Fax number, press the [MONITOR/PAUSE] button to cut the line, and then press
the [MONITOR/PAUSE] button again to redial.
6
When you hear the answer tone (short high-pitched tone) through
the built-in speaker indicating the connection has been made with
the remote Fax, press the [START] button.
When you hear the other party’s voice answering the call before pressing the [START]
button, pick up the handset of the external telephone and press the [MONITOR/PAUSE]
button. Then, ask him/her to operate their equipment for receiving a Fax.
4
Press the [MONITOR/PAUSE] button.
yYou will hear the dial tone from the built-in
speaker.
yTo cancel the setting, press the [MONITOR/
PAUSE] button again.