2 SENDING A FAX
52 Sending Originals
5
Specify the remote Fax.
ySpecifying by digital keys ( P.40 “Direct entry with digital keys”)
ySpecifying by address book ( P.41 “Address book entry”)
6
Press the [START] button.
yThe remote Fax is dialed immediately and communication is initiated.
yCanceling the direct transmission ( P.76 “Canceling direct transmission (during
scanning)”)
Memory transmission
In the memory transmission mode, originals are scanned at high speed and temporarily stored
in memory before transmitting.
yUp to 100 transmissions can be reserved.
yUp to 1000 pages can be stored in 1 transmission.
yYou can specify two or more remote Faxes at one time.
yIf the original cannot be sent (the remote Fax is busy or otherwise unavailable), the remote
Fax is automatically redialed repeatedly.
yDocuments can no longer be added to memory if it becomes full midway during scanning. In
this case, reduce the number of originals you are sending, or try sending in the direct trans-
mission mode. ( P.51 “Direct transmission”)
yIf an original is placed on the original glass, the scanning conditions can be changed for
each page. ( P.37 “Setting the scanning conditions for each page”)
1
Place the original(s).
y P.30 “Setting originals”
2
Press the [FAX] button on the control panel.
3
Press the [ADDRESS] button to enter the address menu, and then
press the [OPTION] button.