Toshiba GD-1210 manual Setting originals When setting originals on the glass

2 SENDING A FAX

Setting originals

When setting originals on the glass

Originals are sent in the order they are placed on the original glass in both memory TX and direct TX modes.

1	Raise the Original Cover (optional) or
	the Reversing Automatic Document

Feeder (optional), and place the orig- inal A with its face down on the glass.

yRaise it 60 degrees or more to detect the original.

2 Align the original against the left inner corner of the glass.

yDifferent size originals can also be sent in one transmission.

yWhen LD, LG, LT-R, ST, COMP, A3, A4-R, A5, B4, B5 or FOLIO originals are placed as shown in the figure on the right, the pre- entered sender information is printed in the shaded position shown B in the figure and

sent to the remote Fax.

y Entering the sender information ( P.154 “Registering the Terminal ID”)

yWhen transmitting non-standard-sized origi- nals, best results are obtained by placing the originals horizontally on the glass.

yWhen LT, ST-R, A4, A5-R or B5-R originals are placed as shown in the figure on the right, the pre-entered sender information is printed in the shaded position shown C in the figure and sent to the remote Fax.

A

B

C

3 Lower the Original Cover (optional) or the Reversing Automatic Document Feeder (optional) slowly.

30 About Originals