2 SENDING A FAX

Transmission Mode

yMemory Transmission

The original is scanned into memory and automatically starts to be sent once a connection has been made. Using this mode, you can send the same original to 2 or more remote Faxes (multi-address transmission).

yDirect Transmission

The remote Fax is dialed immediately, and the original will be sent as it is being scanned. This mode is useful if you want to confirm connection to the remote Fax or when you want to send an urgent Fax document. Originals are not stored in memory, and you can only specify one remote Fax at a time.

yDirect Entry with digital keys

You can dial the telephone number of the remote Fax directly using the digital keys

yAddress Book Entry

You can specify a remote Fax that has been registered into the address book.

yMulti-address Transmission

You can send the same original to 2 or more remote Faxes in a single operation.

yGroup Entry

Originals are sent to the destinations that have already been specified as a group.

yRecovery Transmission

A document is held in the memory after the initially specified number of redial attempts have failed. You can retransmit the documents held in memory by touching the screen.

yOn-hook Transmission

You can make a telephone call and then send the originals without picking up the handset of the external telephone. When the line is connected to the remote Fax and a dial tone (short high-pitched tone) is heard, press the [START] button to send the original. You can also use keypad (digital keys) dialing and address dialing.

yOff-hook Transmission

*Only available if an external telephone is attached.

Pick up the external telephone, make a telephone call and then send the originals. When the line is connected to the remote Fax and a response tone (short high-pitched tone) is heard, press the [START] button to send the original. You can also use keypad (digital keys) dialing and address dial- ing.

yPriority Transmission

You can send a priority transmission and interrupt the current communication. This function allows you to interrupt the current communication and send the Priority Transmission. Trans- mission is resumed after completing the current communication.

yPolling Transmission

You can store originals in memory, and wait for a request from a remote Fax to send the orig- inals. When the request arrives, the originals are automatically sent to the remote Fax that sent the request. The remote Fax can receive originals at any convenient time. You can also inhibit remote Faxes which do not have the corresponding password to receive the originals by appending the password to the document.

yMailbox Transmission

You can have confidential, bulletin board and multi-address relay mail communication, trans- mission box with remote Faxes that support the ITU-T Mailbox functions.

26 Transmission Mode

Page 28
Image 28
Toshiba GD-1210 manual Transmission Mode