2 SENDING A FAX
28 Preparation for Transmission
Preparation for Transmission
Switching to the Fax mode
When the use of the equipment is managed under certain functions
such as department management
When the use of the equipment is managed under the department management or the user
management, each user needs to enter the department code, user ID, password, etc. For these
operations, see the Operator's Manual for Basic Function.
1
Press the [FAX] button on the control
panel to select the Fax function.
yBe sure to switch over to the Fax mode
before carrying out Fax operations.
yIf you leave the equipment for about 45 sec-
onds, it automatically returns to the copy
mode.
yYou can also switch to the Fax mode when
the equipment is in the energy-saving mode.