COMMAND LINE INTERFACE
show system
Use this command to display system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
•For a description of the items shown by this command, refer to “Displaying System Information” on page
•The POST results should all display “PASS.” If any POST test indicates “FAIL,” contact your distributor for assistance.
Example
Console#show system
System description: TigerSwitch 10/100 - 6724L2 Managed 24+2 Standalone Switch
System OID string: 1.3.6.1.4.1.259.6.10.42 System information
System Up time: 0 days, 3 hours, 53 minutes, and 31.79 seconds
System Name | : [NONE] |
System Location | : [NONE] |
System Contact | : [NONE] |
MAC address | : |
Web server | : enable |
Web server port | : 80 |
POST result
UART Loopback Test | PASS | |
Flash Memory Checksum Test | PASS | |
CPU Self | Test | PASS |
MPC850 clock Timer and Interrupt TEST... | PASS | |
WatchDog | Timer and Interrupt Test | PASS |
DRAM Test | ............................... | PASS |
ACD Chip | Test | PASS |
Switch Driver Initialization | PASS | |
Switch Internal Loopback Test | PASS | |
DONE | ||
Console# |
|
|
