SMC Networks 10/100 manual Required Connections

CONNECTING TO THE SWITCH

•RADIUS client support

•MAC filtering security

Required Connections

The switch provides an RS-232 serial port that enables a connection to a PC or terminal for monitoring and configuring the switch. A null-modem console cable is provided with the switch.

Attach a VT100-compatible terminal, or a PC running a terminal emulation program to the switch. You can use the console cable provided with this package, or use a null-modem cable that complies with the wiring assignments shown in Appendix B.

To connect a terminal to the console port, complete the following steps:

1.Connect the console cable to the serial port on a terminal, or a PC running terminal emulation software, and tighten the captive retaining screws on the DB-9 connector.

2.Connect the other end of the cable to the RS-232 serial port on the switch.

3.Make sure the terminal emulation software is set as follows:

•Select the appropriate serial port (COM port 1, or COM port 2).

•Set the data rate to 9600 baud.

•Set the data format to 8 data bits, 1 stop bit, and no parity.

•Set flow control to none.

•Set the emulation mode to VT100.

•When using HyperTerminal, select Terminal keys, not Windows keys.

1-3