ADDRESS TABLE COMMANDS
mac-address-table static
Use this command to map a static address to a destination port. Use the no form to remove an address.
Syntax
no
•
•interface
•ethernet unit/port
-unit - This is device 1.
-port - Port number.
•port-channel channel-id (Range: 1-4)
•discard - Discards all packets matching the destination address.
•action -
-
-permanent - Assignment is permanent.
Default Setting
No static addresses are defined. The default mode is permanent.
Command Mode
Global Configuration
Command Usage
The static address for a host device can be assigned to a specific port within a specific VLAN. Use this command to add static addresses to the MAC Address Table. Static addresses have the following characteristics:
