SMC Networks 10/100 manual Snmp-server enable traps

COMMAND LINE INTERFACE

The snmp-server host command is used in conjunction with the snmp-server enable traps command. Use the snmp-server enable traps command to specify which SNMP notifications are sent globally. For a host to receive notifications, at least one snmp-server enable traps command and the snmp-server host command for that host must be enabled.

However, some notification types cannot be controlled with the snmp-server enable traps command. For example, some notification types are always enabled.

Example

Console(config)#snmp-server host 10.1.19.23 batman version 1 Console(config)#

Related Commands

snmp-server enable traps (3-58)

snmp-server enable traps

Use this command to enable this device to send Simple Network Management Protocol traps or informs (SNMP notifications). Use the no form to disable SNMP notifications.

Syntax

snmp-server enable traps [authentication link-up-down]no snmp-server enable traps [authentication link-up-down]

•authentication - Keyword to issue authentication failure traps.

•link-up-down- Keyword to issue link-up or link-down traps.

The link-up-down trap can only be enabled/disabled via the CLI.

3-58