C
ONFIGURING
THE
S
WITCH
2-30
Port ConfigurationDisplaying Connection Status
You can use the Port Information or Trunk Information pages to
display the current connection status, including link state, speed/
duplex mode, flow control, and auto-negotiation .
Command Attributes
•Name – Interface label.
•Type – Indicates the port type (100BASE-TX, 1000BASE-T,
1000BASE-SX, 1000BASE-LX or 100BASE-FX).
•Admin Status – Shows if the interface is enabled or disabled.
- Web - Displays Enabled or Disabled.
- CLI - Displays Port Admin (up or down).
•Link Status – Indicates if the link is Up or Down. (CLI only)
•Oper Status – Indicates if the link is Up or Down. (Web only)
•Port Operation Status – Provides detailed information on port
state.
- CLI only; displays this item only if the link is up.
•Speed/Duplex Status – Shows the current speed and duplex
mode.
•Flow Control Status – Indicates the type of flow control
currently in use.
- Web - IEEE 802.3x, Back-Pressure or None.
- CLI - Enabled or Disabled. Flow Type shows IEEE 802.3x,
Back-Pressure or None.
•Autonegotiation – Shows if auto-negotiation is enabled or
disabled.