RATE LIMIT CONFIGURATION

Rate limiting can be applied to individual ports or trunks. When an interface is configured with this feature, the traffic rate will be monitored by the hardware to verify conformity. Non-conforming traffic is dropped, conforming traffic is forwarded without any changes.

Command Attribute

Port/Trunk – The switch interface.

Rate Limit Status – Enables or disables the rate limit.

Rate Limit (Percent) – Sets the rate limit to predefined percentage of bandwidth.

Option

Percentage (based on port type)

 

 

 

 

 

10 Mbps

100 Mbps

1000 Mbps

 

 

 

 

3

312K

3.12M

31.2M

 

 

 

 

6

625K

6.25M

62.5M

 

 

 

 

9

938K

9.38M

93.8M

 

 

 

 

12

1.25M

12.5M

125M

 

 

 

 

20

2M

20M

200M

 

 

 

 

40

4M

40M

400M

 

 

 

 

60

6M

60M

600M

 

 

 

 

80

8M

80M

800M

 

 

 

 

2-99

Page 131
Image 131
SMC Networks 10/100 manual Option