9244299_6265_en_au_oth.fm Page 64 Friday, November 18, 2005 11:54 AM

S e t t i n g s

DTMF tones are sent during an active call. You can send them manually from your phone keypad, or send them automatically by saving them in your phone.

Set type

In standby mode, select Menu > Settings > Phone > DTMF tones > Manual DTMF tones and one of the following:

Continuous—The tone sounds for as long as you press and hold a key.

Fixed—Used to send tones of the duration you specify in the DTMF tone length option.

Off—Used to turn off tones. No tones are sent when you press a key.

Set length

You can also specify DTMF tone length when using the Fixed option.

In standby mode, select Menu > Settings > Phone > DTMF tones > DTMF tone length > Short (0.1 seconds) or Long (0.5 seconds).

Start-up tone

If the Start-up tone is activated, the tone sounds when you turn on your phone. In standby mode, select Menu > Settings > Phone > Start-up tone > On or Off.

Help text activation

Your phone displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 15 seconds and wait for the help text to display. Scroll to page through the full help text, if necessary.

The default setting for help text is on. However, you can turn help text on or off.

In standby mode, select Menu > Settings > Phone > Help text activation > On or Off.

Voice commands

You can set up to five Voice commands, which allow hands-free operation of certain phone features.

Add a voice tag

Before using Voice commands, you must first add a voice tag to the phone function.

1.In standby mode, select Menu > Settings > Voice commands.

2.Select a function option you wish to tag, and select Add.

3.Select Start, and speak the voice tag clearly into the microphone.

Do not select Quit unless you want to cancel the recording.

64

Page 76
Image 76
Nokia 6265 manual Voice commands, Start-up tone, Help text activation, Add a voice tag