Nokia 6265 manual Voice recorder, Radio options, Record speech or sound

9244299_6265_en_au_oth.fm Page 52 Friday, November 18, 2005 11:54 AM

M e d i a

Save channel—To save the channel to a memory location 1 to 9, press and hold the corresponding number key. To save a channel to a memory location 10 to 20, briefly press 1 or 2, then press and hold the desired number. Enter the name of the channel, select OK.

Select channel—To select to a channel,

select or . To go directly to a saved channel, briefly press the corresponding number key.

When an application using a browser connection is sending or receiving data, it may interfere with the radio.

When you place or receive a call, the radio automatically mutes. Once the call is ended, the radio switches back on.

Radio options

In standby mode, select Menu > Media > Radio. The radio turns on. Select Options and one of the following:

Turn off—Turn off the radio.

Save station—Enter a name for the channel, and select OK. Select one of 20 locations to save the channel location.

Stations—Select from the list of current saved channels on your phone. Use Options > Delete station to clear channels or Options > Rename to rename channels.

Mono output or Stereo output—Listen to the radio in monaural mode or in stereo (default). Stereo output is available through a stereo enhancement.

Headset or Loudspeaker—With the headset attached, listen to the radio through a headset or the loudspeaker.

Set frequency—Manually enter the frequency of a known radio station, and select OK. You can also press * to set a frequency.

■Voice recorder

Voice recorder allows you to make a short (up to 3 minutes) recording and save it to the Recordings folder or another folder in the Gallery. The recorder cannot be used when a data call is active.

Record speech or sound

1.In standby mode, select Menu > Media > Voice recorder.

2.To start the recording, select record virtual button.

3.Hold the phone in the normal position near your ear, and record your message.

4.When you are finished recording, select stop virtual button.

The recording is given a default name and saved to the Recordings list.

The default location of the Recordings

52