Nokia 6265 manual Stopwatch, Change the timer, Stop the timer before the alarm sounds

9244299_6265_en_au_oth.fm Page 86 Friday, November 18, 2005 11:54 AM

standby mode, press any key during the alarm to stop the timer.

After 60 seconds the timer alert expires automatically. Select Exit or press the end key to clear the timer note.

Change the timer

After you have set a timer, you can change the time.

1.In standby mode, select Menu > Organiser > Countdown timer > Change time.

2.Enter the new time, and select OK.

3.Leave the note as it was, or enter a new note, and select Start.

Stop the timer before the alarm sounds

After you have set the timer, you can stop the timer.

In standby mode, select Menu > Organiser > Countdown timer > Stop timer.

■Stopwatch

Your phone has a stopwatch that can be used to track time. The stopwatch displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ss format.

Using the stopwatch or allowing it to run in the background when using

86

other features increases the demand on battery power and reduces battery life.

Measure split or lap time

Use the split time or lap time functions for activities where you need to pace yourself.

1.In standby mode, select Menu > Organiser > Stopwatch > Split timing or Lap timing > Start.

Split timing—Use the split time function for such activities as a long distance race when you need to pace yourself. Select Split to note the lapsed time. The timer continues to run and the split time appears below the running time. Each time you select Split, the new measured time appears at the beginning of the list. The maximum number of splits is 20.

Lap timing—Use the lap time function when you want to track how long it takes to complete each cycle or lap. Select Lap to note the lap time. The clock stops, then immediately restarts from zero. The lap time appears below the running time. Each time you select Lap, the new measured time appears at the beginning of the list. The maximum number of laps is 20.

2.Select Stop to end timing and display total time.