Nokia 6265 manual Security, Phone lock, Allowed number if lock active

9244299_6265_en_au_oth.fm Page 72 Friday, November 18, 2005 11:54 AM

S e t t i n g s

Select On to activate the HAC.

Verify that the hearing aid is set to T- coil mode, and hold the phone against the ear.

Only activate the T-coil hearing aid mode when using your device with a hearing aid or it may impact the audio performance of the device.

■Security

To access Security for the first time, you must enter the preset lock code. By default, the preset lock code is the last four digits of your phone number. Depending on your wireless service provider or network operator, the preset lock code may be a four digit number such as 1234 or 0000. If none of these work, contact your wireless service provider or network operator for help.

2.Enter the lock code, and select OK.

3.Select Phone lock and one of the following:

Off—Immediately turns off the phone lock feature.

Lock now—Immediately turns on the phone lock feature.

On power-up—Turns on the phone lock feature the next time you turn the phone on.

If you select Lock now, you must enter your lock code before the phone will function normally. After the lock code is accepted, your phone functions normally.

Call not allowed appears if you attempt to place a call while your phone is locked.

To answer a call with phone lock on, select Answer, or press the call key.

Phone lock

The phone lock feature protects your phone from unauthorised outgoing calls or unauthorised access to information stored in the phone. When phone lock is activated, Phone locked is displayed each time you turn your phone on.

When the device is locked, you can still call the official emergency number programmed into your phone.

1.In standby mode, select Menu > Settings > Security.

72

Allowed number if lock active

With phone lock on, the only outgoing calls you can make are to the emergency number programmed into your phone (for example, 000, 111, or

911)and the numbers stored in the Allowed no. if lock active location.

1.In standby mode, select Menu > Settings > Security.

2.Enter the lock code, and select OK.