Nokia 6265 manual Select Allowed no. if lock active Assign, Select Change lock code

9244299_6265_en_au_oth.fm Page 73 Friday, November 18, 2005 11:54 AM

S e t t i n g s

3.Select Allowed no. if lock active > Assign.

4.Enter the phone number, or select Search to retrieve the number from the phone book; select OK.

To place a call to an allowed number when the phone is locked, enter the allowed number and press the call key.

Change lock code

When changing the lock code, avoid using codes similar to emergency numbers such as 000, 111, or 911 to prevent accidental dialling of an emergency number.

By default, the preset lock code is the last four digits of your phone number. Depending on your wireless service provider or network operator, the preset lock code may be a four-digit number such as 1234 or 0000. If none of these work, contact your wireless service provider or network operator for help.

If you enter an incorrect lock code five times in a row, your phone may ask you for the security code. By default, the security code is the five-digit number, 12345.

Note: If you enter the wrong lock code five times in succession, your phone will not accept your current lock code for 5 minutes. This occurs even if when you power down the phone between incorrect attempts.

To change the phone lock code, do the following:

1.In standby mode, select Menu > Settings > Security.

2.Enter the current lock code, and select OK.

3.Select Change lock code.

4.Enter the new lock code (only 4 characters), and select OK.

5.Enter the new lock code again for verification, and select OK.

When you change your lock code, make sure to remember it. If necessary, write it down and store it in a safe place away from your phone.

Avoid entering a lock code similar to emergency numbers to prevent accidental emergency calls.

73