Nokia 6265 manual Add new contacts, Save a name and number, Save a number only, Save a contact

9244299_6265_en_au_oth.fm Page 35 Friday, November 18, 2005 11:54 AM

C o n t a c t s

■Add new contacts

Save a name and number

1.In standby mode, enter the phone number you wish to save.

2.Select Save.

3.Enter the name, and select OK > Done.

When you enter a number, you can select Options > Insert pause (’p’) to insert a pause code or Options > Insert wait (’w’) to insert a wait code.

Save a number (only)

1.In standby mode, enter the phone number you wish to save.

2.Select and hold Options.

Save a contact

1.In standby mode, select Menu > Contacts > Names > Options > Add new.

2.Enter the name, and select OK.

3.Enter the phone number, and select OK.

Insert dialling codes

You can insert special characters called dialling codes into phone numbers such as voice mail, and save the number to a speed dial location. Dialling codes instruct the receiving system to pause, wait, bypass,

or accept the numbers that follow them in the dialling string.

You can automate voice mail with dialling codes. For more information, see “Automate voice mail”, p. 29.

Press * repeatedly to cycle through dialling codes. When the desired code appears in the display, pause briefly and the code is inserted into the dialling string.

The following dialling codes are available:

Dialling Indicates...

code

*Bypasses a set of instruc- tions.

+Causes the international access code to be replaced by +.

pPauses for 2.5 seconds be- fore sending any numbers that follow.

wWaits for you to press the call key before sending the numbers or codes that fol- low.

35