Panasonic KX-TG4133M, KX-TG4132N, KX-TG4134 Error messages, Display message Cause/solution

	Useful Information
Error messages
Display message	Cause/solution
Base no power	L The handset has lost communication with the base
or	unit. Move closer to the base unit and try again.
	L Unplug the base unit’s AC adaptor to reset the unit.
No link. Re-connect base AC	Reconnect the adaptor and try again.
	L The handset’s registration may have been canceled.
adaptor.	Re-register the handset (page 25).
Busy	L The called unit is in use.
	L Other units are in use and the system is busy. Try
	again later.
	L The handset you are using is too far from the base
	unit. Move closer and try again.
Call phone company for your	L You have not stored the voice mail access number.
access #	Store the number (page 34).
Check tel line	L The supplied telephone line cord has not been
	connected yet or not connected properly. Check the
	connections (page 9).
Error!!	L Recording was too short. Try again.
Invalid	L There is no handset registered to the base unit
	matching the handset number you entered.
	L The handset is not registered to the base unit.
	Register the handset (page 25).
Requires subscription to	L You must subscribe to a Caller ID service. Once you
Caller ID.	receive caller information after subscribing to a
	Caller ID service, this message will not be displayed.
Use rechargeable battery.	L A wrong type of battery such as Alkaline or
	Manganese was inserted. Use only the rechargeable
	Ni-MH batteries noted on page 4, 6.

For assistance, please visit http://www.panasonic.com/help 39