Panasonic KX-TG4133M, KX-TG4132N Registering a unit, Call block Caller ID subscribers only

Programming

4{r}: Select the desired setting. s

{SELECT} 2 times

5{OFF}

Call block (Caller ID subscribers only)

This feature allows the unit to reject calls when:

–the unit receives a call from a phone number stored in the call block list as unwanted (“Storing unwanted callers”, page 24).

–the unit receives a call without phone number (“Blocking incoming calls without phone number”, page 24).

When a call is received, the unit rings for a short time while the caller is being identified. If the phone number matches an entry in the call block list, the unit sends out a busy tone to the caller, and then disconnects the call.

Important:

LWhen the unit receives a call from a number that is stored in the call block list or a call without a recognized phone number, the call is logged in the caller list (page 27) with $after the call is disconnected.

Storing unwanted callers

You can store up to 30 phone numbers in the call block list.

Important:

LWe recommend storing 10 digits (including an area code). If only 7 digits are stored, all numbers that have the same last 7 digits will be blocked.

■From the caller list:

1 {<} CID

2 {r}: Select the entry to be blocked. L To edit the number, press {EDIT} repeatedly until the phone number

is shown in the 10-digit format.

3{SAVE}

4{r}: “Call block” s {SELECT}

5{r}: “Yes” s {SELECT}

6Edit the phone number if necessary (24 digits max.).

7{SAVE} s {OFF}

■By entering phone numbers:

1{MENU}(217 s{ADD}

2Enter the phone number (24 digits max.).

L To erase a digit, press {CLEAR}.

3{SAVE} s {OFF}

Blocking incoming calls without phone number

You can reject a call when no phone number is provided, such as a call just showing “Out of area”.

1{MENU}(24)

2{r}: Select the desired setting. s

{SAVE} s {OFF}

Viewing/editing/erasing call block numbers

1{MENU}(217

2{r}: Select the desired entry. L To exit, press {OFF}.

3To edit a number:

{EDIT} s Edit the phone number. s

{SAVE} s {OFF}

To erase a number:

{ERASE} s {r}: “Yes” s{SELECT} s{OFF}

Note:

LWhen editing, press the desired dial key to add, {CLEAR} to erase.

L When viewing, “Block w/o num” is displayed if the blocking incoming calls without phone number feature is turned on. To turn the feature off: {ERASE} s{V} s {SAVE} s {OFF}

Registering a unit

Operating additional units

Additional handsets

Up to 6 handsets can be registered to the base unit.

24For assistance, please visit http://www.panasonic.com/help