Panasonic KX-TG4134M Special programming, Alarm, Silent mode, Changing the handset name

Programming

Special programming

Alarm

An alarm sounds at the set time for 3 minutes once or daily. Alarm can be set for each handset.

Important:

LSet the date and time beforehand (page 12).

1{MENU}(72)

2{r}: Select the desired alarm option. s

{SELECT}

Off	Turns alarm off. Go to step 7.
Once	An alarm sounds once at the
	set time.
Daily	An alarm sounds daily at the
	set time. Go to step 4.

3Enter the desired month and date. s

{OK}

4Set the desired time.

5{AM/PM}: Select “AM” or “PM”. s {OK}

6{r}: Select the desired alarm tone. s

{SELECT}

L We recommend selecting a different ringer tone from the one used for outside calls.

7{SELECT} s{OFF}

L When the alarm is set, Eis displayed.

Note:

LTo stop the alarm, press {OFF} or place the handset on the base unit or charger.

LWhen the handset is in use, the alarm will not sound until the handset is in standby mode.

Silent mode

Silent mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each handset.

Important:

LSet the date and time beforehand (page 12).

LWe recommend turning the base unit ringer off (page 15) in addition to turning the silent mode on.

LIf you have set the alarm, the alarm sounds even if the silent mode is turned on.

Turning silent mode on/off

1{MENU}(238

2{r}: Select the desired setting. s

{SAVE}

L If you select “Off”, press {OFF} to exit.

3Enter the desired hour and minute you wish to start this feature.

4{AM/PM}: Select “AM” or “PM”. s{OK}

5Enter the desired hour and minute you wish to end this feature.

6{AM/PM}: Select “AM” or “PM”.

7{SAVE} s {OFF}

L When the silent mode is set, &is displayed.

Changing the start and end time

1{MENU}(237

2Continue from step 3, “Turning silent mode on/off”, page 23.

Changing the handset name

Each handset can be given a customized name (“Bob”, “Kitchen”, etc.). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. The default setting is “No”. If you select “Yes” without entering any handset name, “Handset 1” to “Handset 6” is displayed.

1{MENU}(1)4

2Enter the desired name (max. 10 characters; see the character table, page 17).

L If not required, go to step 3.

3{SAVE}

For assistance, please visit http://www.panasonic.com/help 23