Panasonic KX-TG4132N, KX-TG4133M, KX-TG4134M Answering system, Liquid damage

	Useful Information
Answering system
Problem	Cause/solution
The unit does not record new	L The answering system is turned off. Turn it on (page 29).
messages.	L The message memory is full. Erase unnecessary
	messages (page 30).
	L The recording time is set to “Greeting only”. Change
	the setting (page 33).
	L If you subscribe to a voice mail service, messages are
	recorded by your service provider/telephone company,
	not your telephone. Change the unit’s number of rings
	setting or contact your service provider/telephone
	company (page 33).
I cannot operate the answering	L Someone is using the unit. Wait for the other user to
system.	finish.
	L A caller is leaving a message. Wait for the caller to finish.
	L The handset is too far from the base unit. Move closer.
I cannot operate the answering	L The remote access code is not set. Set the remote access
system remotely.	code (page 31).
	L You are entering the wrong remote access code. If you
	have forgotten your remote access code, enter the
	remote access code setting to check your current code
	(page 31).
	L Press each key firmly.
	L The answering system is turned off. Turn it on (page 32).
Liquid damage
Problem	Cause/solution
Liquid or other form of moisture	L Disconnect the AC adaptor and telephone line cord from
has entered the handset/base	the base unit. Remove the batteries from the handset and
unit.	leave to dry for at least 3 days. After the handset/base
	unit are completely dry, reconnect the AC adaptor and
	telephone line cord. Insert the batteries and charge fully
	before use. If the unit does not work properly, contact an
	authorized service center.

Caution:

LTo avoid permanent damage, do not use a microwave oven to speed up the drying process.

For assistance, please visit http://www.panasonic.com/help 43