Moxa Technologies EDS-518A Series RS-232Console Configuration (115200, None, 8, 1, VT100), can, NOTE, NOTE, Open, cannot, Emulator, Port Manager, Getting Started, Connection Caution

EDS-518A Series User’s Manual	Getting Started
RS-232 Console Configuration (115200, None, 8, 1, VT100)
NOTE	Connection Caution!

1.You cannot connect to EDS-518A simultaneously by serial console and Telnet.

2.You can connect to EDS-518A simultaneously by web browser and serial console, or by web browser and Telnet.

However, we strongly suggest that you do NOT use more than one connection method at the same time. Following this advice will allow you to maintain better control over the configuration of your EDS-518A.

NOTE	We recommend using MOXA PComm Terminal Emulator, which can be downloaded free of
	charge from MOXA’s website.

Before running PComm Terminal Emulator, use an RJ45 to DB9-F (or RJ45 to DB25-F) cable to connect EDS-518A’s RS-232 Console port to your PC’s COM port (generally COM1 or COM2, depending on how your system is set up).

After installing PComm Terminal Emulator, perform the following steps to access the RS-232 Console utility.

1.From the Windows desktop, click Start Æ Programs Æ PCommLite2.5 Æ TerminalEmulator.

2.Select Open under Port Manager to open a new connection.

2-2