Moxa Technologies TN-5308 manual Connecting the Power Supply

ATTENTION

This product is intended to be mounted to a well-grounded mounting surface such as a metal panel.

Connecting the Power Supply

The M12/M23 A-coded 5-pin male connector on the TN-5308-LV/MV front panel is used for the DC power input. You have to prepare a power cord with M12/M23 A-coded 5-pin female connector to connect the switch to the DC power input.

Pinouts for the power input port on the TN-5308-LV

N.C. : Not connected

Pinouts for the power input port on the TN-5308-MV

STEP 1: Plug your power cord connector to the power input port of the TN-5308 switch.

STEP 2: Screw the nut on your power cord connector to the power input connector on the switch to ensure a tight connection.

ATTENTION

Before connecting the TN-5308 to the DC power input, make sure the DC power source voltage is stable.

— 7 —