14.Finish tightening the screws.
15.Secure the power cord against the cabinet bottom or rear wall by using the two
Removing The Coffeemaker
1.Remove the glass decanter and brew funnel. After use, allow the coffeemaker to cool completely.
2.Grasp the bottom left and right edges and depress the 2 BRACKET RELEASE BUTTONS. Lower the coffeemaker off the brackets.
IMPORTANT, THE CLOCK ON THIS MODEL MUST BE SET FIRST, BEFORE THE COFFEEMAKER WILL
OPERATE. Please refer to setting the clock instructions, below.
Setting the Clock and Timer
The clock in this appliance includes an automatic brew start mode (AUTO) with a safety feature to prevent accidental
PM Indicator
B r e w L i g h t ! indicates when coffeemaker is ON
Control Switch
Start
TO SET CLOCK.. .
1. Move the CONTROL SWITCH to OFF.
Hour advances clock by the hour
/Auto Off Light indicates machine shut itself off
Brew Set sets time to auto brew
Minute advances clock by minute
2.Plug the power cord into your electrical outlet. The display on the clock will flash until you set the time.
3.Alternately press and hold the HOUR and MINUTE buttons until you reach the current time. A red dot will appear in the upper left display corner for PM time.
TO PRE-SET THE BREWING TIME.. .
Press and hold the BREW SET button while pressing the HOUR and M!,NUTE buttons to set the desired brew starting time. Please pay attention to PM INDICATOR light.
TO AUTOMATICALLY BREW AT PRE-SET TIME.. .
1.Follow steps #l through #6 in “How
2.Slide the control switch to OFF and then to AUTO.
3.Brewing will begin at the time you have preset and the coffee will remain hot in the decanter for 2 hours. If more keep warm time is needed, slide the switch to ON for an additional 2 hour keep warm time.
5
