Mr. Coffee SB Medidas de Café Sugeridas, Indicador de Control de Preparación Café Descafeinado

Medidas de Café Sugeridas

Para obtener mejores resultados, use café molido para uso en cafeteras de goteo automáticas. Las cantidades indicadas abajo son cantidades sugeridas.

Número de Tazas	Cucharadas Soperas
10	7.5
8	6
6	4.5

Una taza = Cinco onzas de café preparado

Use más o menos café de acuerdo a su gusto.

POR FAVOR NOTE: Puede que el café descafeinado requiera una cantidad adicional de café.

Indicador de Control de Preparación – Café Descafeinado

Su Cafetera MR. COFFEE® SPEEDBREW® viene con un dispositivo especial que le permite preparar una jarra ideal de café descafeinado. Simplemente gire el Indicador de Control de Preparación a “Preparación de descafeinado.” Este dispositivo toma en cuenta el tiempo adicional necesario para preparar café descafeinado. Por favor note que sólo se deberá usar café descafeinado cuando el Indicador de Control de Preparación esté en esta posición.

PRECAUCIÓN: para evitar desbordar la canasta de preparación, no use café descafeinado a menos que el Indicador de Control de Preparación se encuentre en la posición de “Preparación de descafeinado.”

Para Obtener Sólo Agua Caliente

Los mismos pasos listados en la Pagina 21 bajo “Preparando Café” pueden ser usados para obtener agua caliente. Mantenga la canasta de preparación en su lugar y omita el filtro y el café. NOTA: Esta agua es más caliente que el agua de su grifo y deberá ser manipulada con cuidado.

IMPORTANT

Before Using Your SPEEDBREW® Coffeemaker for the First Time

Wash decanter, decanter lid and removable brew basket in mild detergent and water. Rinse each thoroughly.

Prepare Your SPEEDBREW® Coffeemaker Before First Use

NOTE: To avoid damage to coffeemaker, do not plug your SPEEDBREW® Coffeemaker into the wall outlet until you complete these steps. This procedure is only necessary the first time the SPEEDBREW®

Coffeemaker is used or after the water reservoir has been drained for moving or long-term storage.

Prior to first use, the water reservoir must be filled with water and the water given time to heat to proper brewing temperature.

1. Make sure your coffeemaker is unplugged.

2. Set the Brew Control Dial to “Brew Regular.”

3.Make sure the brew basket and decanter are in place on the coffeemaker. Raise the water reservoir

lid on the top of the coffeemaker (see Figure 1). Use

a separate pitcher to slowly pour 1 gallon (3.8 liters)FIGURE 1 of cool water into the water reservoir opening. If the

red Overfill Indicator floats up, please allow the

water to drain into the reservoir before continuing to pour.

4. When the water reservoir is full, water will flow into the decanter. After the flow
of water into the decanter stops, empty the decanter and return it to the
coffeemaker.
5. Now you may plug your SPEEDBREW® Coffeemaker
into a working 120V, AC outlet.
6. Press the Reservoir Power Switch located on the
lower left side of the coffeemaker to “On” (see
Figure 2). Wait at least 20 minutes for the water in
the water reservoir to reach the ideal brewing
temperature. To brew coffee, follow the “Brewing
Coffee” instructions on page 8.
NOTE: The Reservoir Power Switch should remain “On” at all
times to keep the water in the water reservoir at the
ideal brewing temperature. The Reservoir Power Switch
should be turned “Off” when your plans take you away
from home for several days or when your coffeemaker	FIGURE	2
will not be in use for an extended period.

7.Before brewing the first pot of coffee it is recommended that the system be flushed clean. To do this, simply follow the “Brewing Coffee” instructions on page 8, but do not add any coffee grounds to the filter.

22 7