Make sure grille guard is in place before running heater. If screen or grille guard is removed for servic- ing it must be replaced prior to operating the heater.­

WARNING: Failure to keep the primary air opening(s) of the burner(s) clean may result in soot- ing and property damage.­

CLEANING ODS/PILOT AND BURNER

•Use as vacuum cleaner, pressurized air or small soft bristled brush to clean.

CLEANING BURNER PILOT AIR HOLE INLET

We recommend that you clean the unit ever 2,500 hours of operation or every three months. We also recommend that you keep the burner tube and pilot as- sembly clean and free of dust and dirt. To clean these parts we recommend using compressed air no greater than 30 psig.

This can be done by using a vacuum cleaner in the blow position, using compressed air in a can, please follow the directions on the can. If you don’t follow directions on the can you could damage the burner or pilot assembly. In addition, the directions that follow should also be followed.

1.Shut off the unit, including the pilot. Allow the unit to cool for at least thirty minutes.

2.Inspect burner and pilot for dust and dirt.

3.Blow air through the port/slots and holes in the burner.

A yellow tip on the pilot flame indicates dust and dirt in the pilot assembly. To clean the pilot assembly find the small pilot air inlet hole about two inches from where the pilot flame comes out of the pilot assembly (see Pilot Air Inlet Hole in figure 25). With the unit off, lightly blow air through the air inlet hole. You may blow through a drinking straw if compressed air is not avail- able.

Figure 25

CLEANING HEATER CABINET

Air passageways

•Use a vacuum cleaner or pressurized air to clean exterior

•Use a soft cloth dampened with a mild soap and water mixture. Wipe the cabinet to remove dust.

SPECIFICATIONS

­

 

 

 

 

 

 

MHVFB10LP

BTU (Available)­

 

 

 

 

10,000­

 

Type of Gas­

LP-Gas Only­

 

 

 

Ignition­

Piezo­

 

Pressure Regulator Setting­

10 Inches of

 

 

Water ­

 

Inlet Gas Pressure (Maximum)­

14 Inches of

 

 

Water­

 

Inlet Gas Pressure (Minimum)­

11 Inches of

 

 

Water­

 

Burners / Orifice nozzles­

1­

 

 

 

 

Thermostatic Control­

No­

 

 

 

 

Clearances: inches (mm)­

­ ­

­

 

 

Top­

36” (915cm)­

 

 

Sides­

6” (152cm)­

 

 

 

Floor (min. to top of carpet)­

2” (51cm)­

 

 

 

Fabric / flammable objects­

36” (915cm)­

 

 

 

 

Unvented LP-Gas Fired Buddy Wall-Mount Heater 11

Installation Instructions and Owner’s Manual

Page 10 Page 12
Page 11
Image 11
Mr. Heater MHVFB10LP installation instructions Specifications, Cleaning Burner Pilot AIR Hole Inlet
Page 10 Page 12

MHVFB10LP specifications

Mr. Heater MHVFB10LP is a powerful and efficient portable propane heater designed for optimal performance in a variety of outdoor and indoor applications. This innovative heating solution is ideal for individuals looking to warm large spaces, such as garages, workshops, and various outdoor events. With its user-friendly design and advanced technology, the MHVFB10LP delivers both comfort and convenience.

One of the standout features of the MHVFB10LP is its impressive heating capacity, providing up to 10,000 BTUs of heat. This output can effectively warm areas up to 225 square feet, making it an excellent choice for both small and moderately sized spaces. The heater has a high-efficiency rating, achieving a 99.9% fuel efficiency, which ensures that users get the most out of their propane supply.

The MHVFB10LP is equipped with an adjustable heat setting, allowing users to customize their heating experience as needed. Whether you need a gentle warmth or a significant boost in temperature, this heater can easily accommodate your requirements. Additionally, the radiant technology utilized in this heater provides warm, even heat across the given space, ensuring a comfortable environment.

Safety is paramount when it comes to heating solutions, and Mr. Heater has incorporated various safety features into the MHVFB10LP. The heater is designed with an automatic shut-off feature that activates if the unit is tipped over or if it detects a low oxygen level. This provides peace of mind for users, allowing them to focus on enjoying their space without undue concern.

The portability of the MHVFB10LP is another noteworthy characteristic. Weighing in at a manageable size, the unit features a convenient carrying handle, allowing users to easily transport it from one location to another. This makes it ideal for camping trips, tailgating events, and workshops alike.

Furthermore, the MHVFB10LP is designed for easy operation, featuring an integrated piezo igniter that allows for quick starts without the need for matches or lighter fluid. This ensures that users can enjoy warmth almost instantly.

In summary, the Mr. Heater MHVFB10LP is a versatile, efficient, and safe propane heater that meets the heating needs of a wide array of users. From its powerful heating capacity and adjustable settings to its safety features and portability, the MHVFB10LP stands out as an essential tool for comfort in both work and leisure activities. Whether you’re looking to ward off the chill on a cold day or need a reliable heat source for your outdoor adventures, this heater delivers exceptional performance.
Top Page Image Contents