Hardware | |
|
|
4Hardware
4.1Plug-in Position of the COM Express module
Sockets for a COM Express type 2 module is available on the base board.
Following form factors are supported:
Compact module (Industry Consortium
Basic module
Extended module
Specification:
Reference: X1
Connector: | AMP / Tyco |
0.5 mm pitch free height 440 pin 5H plug (combination of two 220pin plugs)
Pinout: Refer to COM Express specification for type 2 module [1]
Row A |
|
| Row B |
|
A1 | GND |
| B1 | GND |
A2 | GBE0_MDI3- |
| B2 | GBE0_ACT# |
A3 | GBE0_MDI3+ |
| B3 | LPC_FRAME# |
A4 | GBE0_LINK100# |
| B4 | LPC_AD0 |
A5 | GBE0_LINK1000# |
| B5 | LPC_AD1 |
A6 | GBE0_MDI2- |
| B6 | LPC_AD2 |
A7 | GBE0_MDI2+ |
| B7 | LPC_AD3 |
A8 | GBE0_LINK# |
| B8 | LPC_DRQ0# |
A9 | GBE0_MDI1- |
| B9 | LPC_DRQ1# |
A10 | GBE0_MDI1+ |
| B10 | LPC_CLK |
A11 | GND |
| B11 | GND |
A12 | GBE0_MDI0- |
| B12 | PWRBTN# |
A13 | GBE0_MDI0+ |
| B13 | SMB_CK |
A14 | GBE0_CTREF |
| B14 | SMB_DAT |
A15 | SUS_S3# |
| B15 | SMB_ALERT# |
A16 | SATA0_TX+ |
| B16 | SATA1_TX+ |
A17 | SATA0_TX- |
| B17 | SATA1_TX- |
A18 | SUS_S4# |
| B18 | SUS_STAT# |
A19 | SATA0_RX+ |
| B19 | SATA1_RX+ |
A20 | SATA0_RX- |
| B20 | SATA1_RX- |
A21 | GND |
| B21 | GND |
A22 | SATA2_TX+ |
| B22 | SATA3_TX+ |
A23 | SATA2_TX- |
| B23 | SATA3_TX- |
A24 | SUS_S5# |
| B24 | PWR_OK |
A25 | SATA2_RX+ |
| B25 | SATA3_RX+ |
A26 | SATA2_RX- |
| B26 | SATA3_RX- |
A27 | BATLOW# |
| B27 | WDT |
A28 | ATA_ACT# |
| B28 | AC_SDIN2 |
A29 | AC_SYNC |
| B29 | AC_SDIN1 |
|
| 14 |
|
|
