BIOS Setup
▶My OC Genie
This item is used to select whether OC Genie parameters are customized by user. Setting to [MSI] OC Genie will use default OC related parameters to overclock the system. Selecting [Customize] allows you to configure the following related “My OC Genie option”
▶My OC Genie option
Press <Enter> to enter the
This item allows you to enable/ disable the overclocking of integrated graphics for My OC Genie function.
▶My OC Genie GT Ratio
This item allows you to specific the GT ratio for My OC Genie function.
▶Adjusted My OC Genie GT Frequency
It shows the iGPU frequency when OC Genie is started.
▶DRAM Reference Clock
This item allows you to specific the DRAM Reference Clock for CPU. Please note the overclocking behavior is not guaranteed.
▶DRAM Frequency
This item allows you to adjust the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶Adjusted DRAM Frequency
It shows the adjusted DRAM frequency.
▶DRAM Timing Mode
Select whether DRAM timing is controlled by the SPD (Serial Presence Detect) EE- PROM on the DRAM module. Setting to [Auto] enables DRAM timings and the following “Advanced DRAM Configuration”
▶Advanced DRAM Configuration Press <Enter> to enter the
▶Command Rate
This setting controls the DRAM command rate.
▶tCL
Controls CAS latency which determines the timing delay (in clock cycles) of starting a read command after receiving data.
▶tRCD
Determines the timing of the transition from RAS (row address strobe) to CAS (col- umn address strobe). The less clock cycles, the faster the DRAM performance.
▶tRP
Controls number of cycles for RAS (row address strobe) to be allowed to
