▶ System Time
This allows you to set the system time that you want (usually the current time). The time format is <hour> <minute> <second>.
▶ SATA Port1~6
It will show the device information that you connected to the SATA connector.
Important
SATA Port1~6 are available when you connect the HDD devices to the SATA connec- tors on the mainboard.
▶ System Information
It shows the information of your system (read only).
Advanced
▶ PCI Subsystem Settings
Press <Enter> to enter the
▶ PCI Latency
Timer
This item controls how long each PCI device can hold the bus before another takes over. When set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. For better PCI perfor- mance, you should set the item to higher values.
▶ ACPI Settings
Press <Enter> to enter the
▶ ACPI Standby State
This item specifies the power saving modes for ACPI function.
▶ Power LED
This item configures how the system uses power LED on the case to indicate the sleep/suspend state.
[Single] | The power LED turns off during the sleep/suspend mode. |
[Dual] | The power LED changes its color to indicate the sleep/suspend |
| state. |
[Blinking] | The power LED blinks to indicate the sleep/suspend state. |
|
