MS-7750

▶USB Devices:

It shows the type of installed USB device. ▶USB Controller

This item allows you to enable/ disable the USB 2.0 controller. ▶Legacy USB Support

Select [Enabled] if you need to use a USB 2.0-interfaced device in the operating system.

▶Onboard USB 3.0 Controller

This item allows you to enable/ disable the USB 3.0 controller. ▶USB 3.0 Legacy Mode Support

Select [Enabled] if you need to use a USB 3.0-interfaced device in the operating system.

▶Super IO Configuration

Press <Enter> to enter the sub-menu.

▶Serial(COM) Port 0 Configuration Press <Enter> to enter the sub-menu.

▶Serial (COM) Port0

This item allows you to enable/ disable the serial port.

▶Serial (COM) Port0 Settings

Select an address and corresponding interrupt for the serial port.

▶Parallel(LPT) Port Configuration Press <Enter> to enter the sub-menu.

▶Parallel (LPT) Port

This item allows you to enable/ disable the parallel port.

▶Parallel (LPT) Port Settings

Select an address and corresponding interrupt for the parallel port.

▶Device Mode

Select a device mode for parallel port.

3-17

3 Chapter