Hardware Setup
Installing Memory Modules
1.Locate the DIMM slots on the mainboard. Flip open the retaining clip at each side of the DIMM slot.
2.Align the notch on the DIMM with the key on the slot. Insert the DIMM vertically into the DIMM slot. Then push it in until the golden finger on the DIMM is deeply inserted in the DIMM slot. The retaining clip at each side of the DIMM slot will automatically close if the DIMM is properly seated.
Important
You can barely see the golden finger if the DIMM is properly inserted in the DIMM slot.
3.Manually check if the DIMM has been locked in place by the retaining clips at the sides.
4.Follow the same procedures to install more DIMMs if necessary.
Volt Notch
