MSI US60G manual After click Add to bring up the Configuration dialogue window as below

STEP2

1

2

After click Add to bring up the Configuration dialogue window as below.

Profile Name: User chose name for this profile.

SSID: User can key in the intended SSID name or use pull .

3Power Save Mode: Choose from CAM (Constantly AwakeMode) or Power Saving Mode. There is a check box for “CAM when AC power”. When this is checked, the wireless NIC will stay full power when AC power cord is plug into power outlet.

4Network Type: There are two types, infrastructure and 802.11 ad-hoc modes. Under ad-hoc mode, user can also choose the preamble type; the available preamble type includes short and long. In addition to that, the “channel” and “Ad hoc wireless mode” field will be available for setup in ad-hoc mode.

5TX Power: Transmit power, the amount of power used by a radio transceiver to send the signal out. User can choose power value by sliding the bar.

2 0