▶Intel
Turbo Boost
Enables or disables Intel Turbo Boost which automatically boosts CPU performance above rated specifications (when applications requests the highest performance state of the processor).
▶OC Genie Button Operation
This item allows you to enable/disable the OC Genie function.
▶DRAM Frequency
This item allows you to adjust the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶Adjusted DRAM Frequency
It shows the adjusted DRAM frequency.
▶DRAM Timing Mode
Select whether DRAM timing is controlled by the SPD (Serial Presence Detect) EE- PROM on the DRAM module. Setting to [Auto] enables DRAM timings and the following “Advanced DRAM Configuration”
▶Advanced DRAM Configuration Press <Enter> to enter the
▶Command Rate
This setting controls the DRAM command rate.
▶tCL
Controls CAS latency which determines the timing delay (in clock cycles) of starting a read command after receiving data.
▶tRCD
Determines the timing of the transition from RAS (row address strobe) to CAS (col- umn address strobe). The less clock cycles, the faster the DRAM performance.
▶tRP
Controls number of cycles for RAS (row address strobe) to be allowed to
▶tRAS
Determines the time RAS (row address strobe) takes to read from and write to mem- ory cell.
▶tRFC
This setting determines the time RFC takes to read from and write to a memory cell.
▶tWR
Determines minimum time interval between end of write data burst and the start of a
