BIOS Setup
If Resume By RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specific date/hour/minute/second specified in these fields (using the <+> and
▶Resume By 
When set to [Enabled], the feature allows your system to be awakened from the power saving modes through any event on PCIe device.
▶Resume From S3 by USB Device
The item allows the activity of the USB device to wake up the system from S3 (Sus- pend to RAM) sleep state.
▶Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard
These items determine whether the system will be awakened from what power sav- ing modes when input signal of the PS/2 mouse/ keyboard is detected.
Boot
▶Full
Screen Logo Display
This item enables this system to show the company logo on the
abled] | Shows a still image (logo) on the full screen at boot. |
[Disabled] | Shows the POST messages at boot. |
== Boot Option Priorities== | |
▶1st~9th Boot
These items are used to prioritize the installed boot devices.
▶Hard Disk Drive BBS Priorities/ CD/DVD ROM Drive BBS Priorities/ USB HardDisk Drive BBS Priorities/ UEFI Boot Drive BBS Priorities
▶1st~8th Boot
These items are used to prioritize the installed Hard Disk Drive/ CD/DVD ROM Drive/ USB HardDisk drives/ UEFI boot drives.
Save & Exit
▶Discard Changes and Exit
Use this item to abandon all changes and exit setup.
▶Save Changes and Reboot
Use this item to save changes and reset the system.
▶Save Changes
Use this item to save changes.
▶Discard Changes
Use this item to abandon all changes.
▶Restore Defaults
Use this item to load the optimized default values set by the BIOS vendor. ==
Boot Override ==
The installed storage devices will appear on this menu, you can select one of them be a boot device.
▶
Shell
Use this item to enter the EFI Shell.
