Assembly & Set-Up

3

 

 

 

Contents of Carton

 

•

One Tiller

•

One 18 oz. bottle SAE 30W oil

•

One Tiller Operator’s Manual

•One Engine Operator’s Manual

NOTE: Stand behind the tiller as if you were going to operate it. Your right hand corresponds to the right side of the tiller and your left hand corresponds to the left side of the tiller.

NOTE: This operator’s manual may cover various models of tillers. The machines illustrated may vary slightly from your tiller.

NOTE: The tiller is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accompanying engine manual before operating your machine.

Assembly

Handle

1.Remove the star handle knobs and the carriage bolts from the lower handle. See Fig. 3-1.

Handle Knobs

Carriage Bolts

2.Position the upper handle onto the lower handle, Step A in Fig. 3-2. Align the holes on the lower handle with the holes on the upper handle. Choose the upper or lower holes depending on the desired handle height.

A

B

B

Figure 3-2

3.Insert carriage bolts through the holes and secure with the star knobs, Step B in Fig.3-2. Make certain the carriage bolts are seated securely into one of the two positions provided.

Figure 3-1