4.

Insert the left end of the tine clutch control into the hole on 6.

Squeeze the tine clutch control inward. Insert the right end

 

the left side of the upper handle. See Fig. 3-3.

into the hole on the right side of the upper handle. See Fig.

 

 

3-5.

Tine Clutch Control

Figure 3-3

5.Insert the Z-fitting on the clutch cable into the hole on the tine clutch control. Hook the “Z” end into the opening from the inside to the outside as shown in Fig. 3-4.

Z-fitting

Clutch Cable

 

Tine Clutch

Control

Figure 3-4

Clutch Control

Figure 3-5

Set-Up

Gas & Oil Fill-Up

Service the engine with gasoline and oil as instructed in the separate engine manual packed with your tiller. Read the instructions carefully.

WARNING! Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel machine indoors or while the engine is hot or running.

Section 2 — Assembly & Set-Up